boxes

Section: User Commands (1)
Updated: February 17 2024

NAME

boxes - text mode box and comment drawing filter

SYNOPSIS

boxes [options] [infile [outfile]]

DESCRIPTION

Boxes is a text filter which can draw any kind of box around its input text. Box design choices range from simple boxes to complex ASCII art. A box can also be removed and repaired, even if it has been badly damaged by editing of the text inside. Since boxes may be open on any side, boxes can also be used to create regional comments in any programming language. New box designs can be added and shared by appending to a configuration file.

boxes is a command line tool, but also integrates with any text editor that supports filters. The boxes website has examples on how to configure editor integration for various text editors:
https://boxes.thomasjensen.com/editors.html

OPTIONS

Options offered by boxes are the following:

-a format, --align=format

Alignment/positioning of text inside box. This option takes a format string argument which is read from left to right. The format string may not contain whitespace and must consist of one or more of the following components:

  • hx - horizontal alignment of the input text block inside a box.
    Possible values for x are l (ell, for left alignment), c (center), or r (right). This does not affect the justification of text lines within the input text block (use the j argument instead).
  • vx - vertical alignment of the input text block inside a box.
    Possible values for x are t (for top alignment), c (center), or b (bottom).
  • jx - justification of lines within the input text block.
    Possible values for x are l (ell, for left justification), c (center), or r (right). This does not affect the alignment of the input text block itself within the box. Use the h and v arguments for input text block positioning.

Short hand notations (can be combined with the above arguments):

  • l (ell) - short for hlvcjl
  • c - short for hcvcjc
  • r - short for hrvcjr

The default for -a is hlvt.

-c string, --create=string

Command line design definition for simple cases. The argument of this option is the definition for the "west" (W) shape. The defined shape must consist of exactly one line, i.e. no multi-line shapes are allowed. The -c option is intended as a shortcut for those cases where simple regional comments are to be created, which only need a certain character or sequence of characters to be placed in front of every line. In such cases, it is much more convenient to simply specify -c than to do a complete design definition in one’s config file, where the only shape defined is the west shape.
This option implies a -d and does not access the config file. -c may of course be used in conjunction with any of the other options. By default, -c is not specified.

--color, --no-color

Printing of color codes. Box designs and the text inside a box may contain ANSI color codes, sometimes called "escape sequences". In this way, boxes and text can be colored.
Whether these escape sequences are printed by boxes is normally determined by the terminal capabilities (default). Using --color, boxes can be told to always output escape sequences even if it thinks the terminal may not understand them. Using --no-color, escape sequences will never be printed.

Of course, even with --color, a box will only appear colored if it is already defined with colors. In case you want to auto-color some text that isn’t yet, take a look at lolcat.
These options consider all escape sequences to be color codes. Any other escape sequences present will be printed or removed along with the color codes.

-d string, --design=string

Design selection. The one argument of this option is the name of the design to use, which may either be a design’s primary name or any of its alias names.

-e eol, --eol=eol

Override line terminator. eol can be CR, LF, or CRLF. The default is to use the system-specific line terminator, which means CRLF on Windows, and LF otherwise. This option should only be used in an emergency, because normally the system-specific line terminator will be just fine. This option is considered experimental, and may go away in a future version of boxes. Let us know in https://github.com/ascii-boxes/boxes/issues/60 if you think we should keep it.

-f string, --config=string

Use alternate config file. The one argument of this option is the name of a valid boxes config file. The argument of -f can also be a directory which contains a configuration file. More information on this topic below in the CONFIGURATION FILE section.

-h, --help

Print usage information.

-i string, --indent=string

Indentation mode. Possible values for string are:

  • text - indent text inside of box
  • box - indent box, not text inside of box
  • none - discard indentation

Arguments may be abbreviated. The default is box.

-k bool, --kill-blank, --no-kill-blank

Kill leading/trailing blank lines on removal. The value of bool is either true or false. This option only takes effect in connection with -r. If set to true, leading and trailing blank lines will be removed from the output. If set to false, the entire content of the former box is returned. The default is false, if both the top and the bottom part of the box are open, as is the case with most regional comments. If the box’s design defines a top part or a bottom part, the default is true.

-l, --list

List designs. Produces a listing of all available box designs in the config file, along with a sample box and information about its creator. Also checks the syntax of the entire config file. If used in conjunction with -d, displays detailed information about the specified design.

-m, --mend

Mend box. This removes a (potentially broken) box as with -r, and redraws it afterwards. The mended box is drawn according to the options given. This may be important to know when it comes to restoring padding, indentation, etc. for the mended box. Implies -k false.

-n encoding, --encoding=encoding

Character encoding. Overrides the character encoding of the input and output text. Choose from the list shown by iconv -l. If an invalid character encoding is specified here, UTF-8 is used as a fallback. The default is to use the system encoding, which is normally the best course of action. So don’t specify this option unless you have to.

-p string, --padding=string

Padding. Specify padding in spaces around the input text block for all sides of the box. The argument string may not contain whitespace and must consist of a combination of the following characters, each followed by a number indicating the padding in spaces:

  • a - (all) give padding for all sides at once
  • h - (horiz) give padding for both horizontal sides
  • v - (vertical) give padding for both vertical sides
  • b - (bottom) give padding for bottom (south) side
  • l - (left) give padding for left (west) side
  • t - (top) give padding for top (north) side
  • r - (right) give padding for right (east) side

Example: -p a4t2 would define the padding to be 4 characters on all sides, except for the top of the box, where the input text block will be only 2 lines away from the box.
The default for this option is determined by the box design used. If the design does not specify anything, no default padding is used.

-q query, --tag-query=query

Query designs by tag. In contrast to -l, this will only print the matching design names. This option is normally used stand-alone; if used in combination with other options, behavior is undefined. The query argument is a comma-separated list of tags which can be present on a design in order to match. A tag may optionally be prefixed with + in order to require that it be present, or with - in order to exclude designs which have that tag. Each tag can only occur once per query. The special query (all) matches all box designs, even if they don't have any tags.
This option is intended for use by scripts. Alias names are printed below their primary design name, and postfixed with (alias).
Example: boxes -q programming,-comment

-r, --remove

Remove an existing box. Which design to use is detected automatically. In order to save time or in case the detection does not decide correctly, combine with -d to specify the design.

-s widthxheight, --size=widthxheight

Box size. This option specifies the desired box size in units of columns (for width) and lines (for height). If only a single number is given as argument, this number specifies the desired box width. A single number prefixed by x specifies only the box height. The actual resulting box size may vary depending on the individual shape sizes of the chosen design. Also, other command line options may influence the box size (such as -p).
By default, the smallest possible box is created around the text.

-t tabopts, --tabs=tabopts

Tab handling. This option controls how tab characters in the input text are handled. The tabopts must always begin with a positive integer number indicating the distance between tab stops, sometimes called "spaces per tab".
Immediately following the tab distance, an optional character can be appended, telling boxes how to treat the leading tabs. The following options are available:

  • e - expand tabs into spaces
  • k - keep tabs as close to what they were as possible
  • u - unexpand tabs. This makes boxes turn as many spaces as possible into tabs.

The -t string can be just a number. In that case, e is assumed for tab handling. The default for the -t option is simply 8, which is just such a case.
For example, you could specify -t 4u in order to have your leading tabs unexpanded. In the box content, tabs are always converted into spaces. The tab distance in this example is 4.

-v, --version

Print out current version number.

CONFIGURATION FILE

Boxes will look for the configuration file in several places, some of which are given by the XDG specification.

  1. -f option [file or dir]
    When a configuration file is specified on the command line, we will use that. The -f option can also specify a directory. Any location specified via -f must exist, or boxes will terminate with an error.
  2. BOXES environment variable [file or dir]
    If no config file is specified on the command line, boxes will check for the BOXES environment variable, which may contain a filename or directory to use. Any location specified via the BOXES environment variable must exist, or boxes will terminate with an error.
  3. $HOME [dir]
  4. $XDG_CONFIG_HOME/boxes [dir]
  5. $HOME/.config/boxes [dir]
  6. /usr/share/boxes [file]
  7. /etc/xdg/boxes [dir]
  8. /usr/local/share/boxes [dir]
  9. /usr/share/boxes [dir]

Either one of these last two directory locations might have the same name as the global config file from 6. That’s fine. It just means that we first look for a file of that name, and then for a directory containing the file.

The XDG environment variable XDG_CONFIG_DIRS is not supported. However, its default value is supported via steps 8 and 9 above.
In the above list, whenever a step is designated with [dir], the following file names will be found, in this order:

  1. .boxes
  2. box-designs
  3. boxes-config
  4. boxes

As soon as the first valid file is found, we use that and stop the search.

The recommended location for a user-specific configuration file is $HOME/.boxes or $HOME/.config/boxes/.boxes. A global configuration file should be located at /usr/share/boxes. But all of the other locations are fully supported, too.

The syntax of boxes config files is described on the website at https://boxes.thomasjensen.com/config-syntax.html.

EXAMPLES

Examples on how to invoke boxes may be found on the website at https://boxes.thomasjensen.com/examples.html.
Try

echo "Good Bye World!" | boxes -d nuke

Boxes also combines nicely with other tools. Try

figlet "boxes . . . !" | lolcat -f | boxes -d unicornthink

AVAILABILITY

The boxes website is https://boxes.thomasjensen.com/. It contains a number of examples illustrating this manual page as well as more in-depth documentation.

AUTHOR

Boxes was made by Thomas Jensen and the boxes contributors. It has been lovingly maintained since 1999.
For a full list of contributors, see https://boxes.thomasjensen.com/team.html#contributors and https://github.com/ascii-boxes/boxes/graphs/contributors.
Please refer to the boxes website for the maintainer’s current email address.

VERSION

This is boxes version 2.3.0.

LICENSE

boxes is free software under the terms of the GNU General Public License, version 3. Details in the LICENSE file: https://raw.githubusercontent.com/ascii-boxes/boxes/v2.3.0/LICENSE

ENVIRONMENT

Boxes recognizes the following environment variables:

BOXES
Absolute path of the boxes configuration file. If this is specified, it must refer to an existing file or directory.
HOME
The user's home directory.
XDG_CONFIG_HOME
The root of the configuration file location as per the XDG specification.

SEE ALSO

figlet(6), iconv(1), lolcat(6)